Dale - PM - 1/15/20 - Vacuum Forming Machine Parts List

* 2 Shop vacuums

* Oven

* Shadow Box -  make a 1' square out of wood and 1 1/4th" deep. Drill two large holes on two sides of the Shadow Box that matches the size of the shop vacuum. Add Felt around the top edges of the box.

* Top Surface - Cut a piece of wood to make a 1' Square and 1/8th" deep. Drill a grid of holes 5mm apart and 1.5mm (1/16th) in size.

* Glue - Epoxy (my choice)

* Frame - make a 1' square from 1x2 wood pieces. Need 4 steel corner braces.

* Hinged Door - cut a 1' square from 1/4" plywood. 2 small brass hinges w/screws

* Plastic - 30mil styrene cut to 1' square pieces. 32 pieces.