Brandon Smith AM open lab 40 min

I took some measurements and cut out the raw material for the horizontal stabilizers.

Dylan AM 2/7/20 hydro car 60+ minutes

What was my Goal for today?

• Install fuel cell
• Continue on next step of building car

How well did I achieve that?

• Turns out the white plastic fat connection got hurt somehow
• We think that some time when we tried to saw the end off

What problems did I face?

• The connection was destroyed, it didn't fit right
• We changed out the fuel cell, sanded down the sides, and made sure not to break the connection.
• It doesn't screw down because screw doesn't sit flush.

What I'm doing next

• Screwing the fuel cell down
• Solving the screw length problem

Stephanie - AM - min - HydroCar

Stephanie - AM - min - HydroCar

Worked on

- velcro on ESC

- screw on motor

-sanded fan edges

Problems

- the fan didn't fit on the base, so we sanded the edge off

- the motor wasn't align with the plastic

Plan

- screw on fan

Christopher - AM - 30 mins - TinkerCad and Python

During the beginning of the lab I tried placing the rudder rail through the large hole. After trying for a couple of minutes, it was no use. And because of this, I slightly increased the size of the hole. The other side, however, does fit perfectly. I didn't print the model today.

For the remainder of openlab, I worked on python code. What I was working on was putting all the scripts I created together. Right now there's a primary menu where a person can access the calculators (wage calculator and the normal the calculator). I then added the lucky number game code.

Ultimately, I refined the program to reduce the amount of bugs and errors. The program is now 200 lines long and I plan to expand it.

Michelle - AM - 50 mins - Catching up Labs and Figuring out error

I was catching up on work that I missed on Tuesday since I had to go to a court order. I was able to finish all the labs but I still can't lab #5 working for conditionals. I've tried to change the coding using these website but I always get a syntax error on except line. 

https://stackoverflow.com/questions/46380181/how-to-use-try-except-statement-in-python-to-handle-non-numeric-inputshttps://docs.python.org/2/tutorial/errors.html 

I've tried to break down the problem from seeing any issues from the first line to the end line. From there, I was able to fix or add any code necessary but I still don't understand what the exact error. I've tried to:

1. Define my variables 

2. Make sure that the lines correlate with each other 

Farmbot list of tasks

1) See if there is a SD card
2) Where does the USB cable go?
3) See if it is powered on or if your re-connect power it turns on... with both Red and Green leds
4) Are there instructions for creating an SD card?
5) Is there instructions for connecting through WiFi
6) Is there instructions to connect remotely (probably with the wifi, Blue tooth or the USB

Dylan AM 2/5 30 minutes hydrocar

What was my Goal for today?

• Solder battery and motor

How well did I achieve that?

• Succeeded

What problems did I face?

• Had to redo the battery a few times
• Difficult to get the wire to fit in the solder point

What I'm doing next

• Sawing the fuel cell sides to fit the screw holes in right.